Assembly instructions · 21 steps
Torso · Cockpit · Shoulders · Arms · Legs · Base
Torso · Steps 1–4
Step 1
Stack the pin (44), turntable (42) and bearing (43) into the hip block (08).
Parts: 44 · 42 · 43 · 08
Step 2
Fit the cockpit interior (07) and pilot seat (56) into the hull (01). Set the hull on its plate (02) and mount it on the hip block.
Parts: 07 · 56 · 01 · 02
Step 3
Press both lens pieces (47) into the front panel (04), then slide the panel into the torso box (03).
Parts: 03 · 04 · 47 ×2
Step 4
Join the torso box to the hull with four pins (46). Plug part 45 into the side slot.
Parts: 46 ×4 · 45
Cockpit · Steps 5–10
Step 5
Fit the cockpit screens 16 and 15 into the console.
Parts shown in gray are the clear pieces.
Parts: 16 · 15
Step 6
Slide a connector (52) into each side of the hull and attach the side guns 54 and 53. Insert the four small guns (55) under the nose.
Parts: 52 ×2 · 54 · 53 · 55 ×4
Step 7
Choose a cockpit cover.
Two options: part 05 has the emblem, part 06 is plain. Use one.
Parts: 05 · 06
Step 8
Fit your chosen cover onto the nose first, then insert the dome (11).
Parts: 05/06 · 11
Step 9
Attach the hatches 10 and 09 to the top of the cockpit cover.
Parts: 10 · 09
Step 10
Insert the canopy windows 12, 13 and 14 into the front of the cockpit.
Parts shown in gray are the clear pieces.
Parts: 12 · 13 · 14
Shoulders · Steps 11–12
Step 11
On each side of the torso, insert a connector (48) and a ring (49), then fit the shoulder mounts 51 and 50.
Parts: 48 ×2 · 49 ×2 · 51 · 50
Step 12
Fill each missile pod (18 and 17) with 15 missiles (19), then mount the pods on the shoulders.
Parts: 19 ×30 · 18 · 17
Arms · Steps 13–14
Step 13
Push the ball joint (23) into the socket (24), then into the upper arm (20).
Repeat once for the second arm.
Parts: 23 ×2 · 24 ×2 · 20 ×2
Step 14
Attach both arms to the shoulders. Insert a pin (40) into each arm cannon (22 and 21), slide it into the arm fork, then lock it with a cross pin (41).
Parts: 40 ×2 · 22 · 21 · 41 ×2
Legs · Steps 15–19
Step 15
Push a ball joint (25) through each hip ring (26) into the hips, then attach the thighs 28 and 27.
Parts: 25 ×2 · 26 ×2 · 28 · 27
Step 16
At each knee, fit a ring (39) and a connector (38), then attach the shins 30 and 29.
Parts: 39 ×2 · 38 ×2 · 30 · 29
Step 17
Slide the toe cap (31) into the ankle (32). Push the ball joint (33) through the collar (34) into the foot base (35) and join it to the ankle.
Repeat once for the second foot.
Parts: 31 ×2 · 32 ×2 · 33 ×2 · 34 ×2 · 35 ×2
Step 18
Insert a pin (36) into each toe (37) and attach three toes to the foot.
Repeat once for the second foot.
Parts: 36 ×6 · 37 ×6
Step 19
Plug both legs into the feet.
Parts: No new parts
Base · Steps 20–21
Step 20
Join the four base sections 58, 60, 61 and 59 with four connectors (57).
Parts: 58 · 60 · 61 · 59 · 57 ×4
Step 21
Set the finished MadCat onto the base.
Parts: No new parts
